Shenzhen Chinasky Laser Technology Co., Ltd. is one of the most professional manufacturers and suppliers of ht-lf-co2-106 large-format 3d dynamic-focus co2 laser engraver in China. Please rest assured to buy high quality ht-lf-co2-106 large-format 3d dynamic-focus co2 laser engraver with 2 years warranty from our factory. We also accept customized orders.
HT-MF1064-20~300MF MOPA Pulsed Fiber Laser Marker for Metal Marking and Deep Engraving
Core Benefits

Full Non-Metal Boards in One Pass
Advertising boards, full hides, fabric rolls and veneer are large, and stitching leaves seams and shade differences; the 1200 or 1600 field finishes them in one pass with consistent relief depth and kerf.
Dynamic Focus on Curved Boards
Curved boards, formed veneer and leather carry continuous curvature, and the Z-axis dynamic focus rewrites the focal plane; a fixed-focus setup needs manual zone refocusing, which the scanner and software take over here.

Field Change Without a Lens Swap
Advertising boards, full leather hides and textile rolls are large, and segmented work leaves seams and shade differences; one pass keeps relief depth and kerf width consistent across the board.
Lift Table for Part Height
A 400–800 mm electric lift table brings the working face to the focal plane without shimming heavy boards, and the 600×500×300 mm XYZ stages handle position adjustment.

product solution
Selection runs in three steps: the field code follows the part outline, the source family and power tier follow material and process, and the stages, lift table and loading method follow part height and changeover frequency. The dynamic-focus module holds spot diameter across the field so large and small fields share one optical path.
Five field-coded models from 300×300 to 1600×1600 mm.
10600 nm RF CO2 source in 100 / 150 / 200 / 300 / 400 / 500 W tiers.
ZnSe optics and water-cooled scanner specified for 10.6 μm.
3 mm single-pass cutting in acrylic and wood, material dependent.
Electric lift table with 400–800 mm travel for part height.
Fume extraction included; 220 V single phase at the low tiers.
applications
Acrylic and Advertising Boards
Large acrylic sheets need relief, engraving and edge cutting, and full-board processing avoids seams; the high tiers with a large beam waist keep energy uniform and edges free of yellowing.
Full Hides and Automotive Interior
Full hides and interior fabrics are large with uneven thickness, and half-cut depth must follow it; 3D tracking with a high tier keeps the kerf consistent across the hide.
Textiles and Apparel Fabrics
Textile rolls and garment cut pieces need marking, perforation and registered cutting; CO2 absorbs well in fabric, and vision positioning aligns to the pattern.
Wood Veneer and Packaging
Wood veneer panels, crates and gift boxes need large-area relief and shallow cutting; CO2 gives high contrast on wood and full-board processing keeps grain continuity.
Product Comparison
|
Factor |
HT 3D |
Alternative |
Benefit |
|
Field change |
Field change is a software calibration setting; no lens swap |
Field lens swapped and refocused per field |
One machine covers several part families |
|
Spot uniformity |
Dynamic focus compensates per scan position, so corner and centre spots match |
Fixed-focus lenses grow the spot and thicken lines at the corners |
Line width stays even across the board |
|
Stitching |
One setup for the full field, no stitching seam |
Segments stitched beyond the field |
No seam and no re-alignment |
|
Part compatibility |
Electric X, Y, Z stages of 600×500×300 mm for varied heights and positions |
Fixed table with limited height |
Fast changeover per part |
|
Calibration and acceptance |
BOX calibration plus focal calibration with full-field error within 0.5 mm |
Delivered on factory parameters only |
Acceptance on a measured basis |
Ordering Process
|
Step |
Description |
Note |
|
Field and Workpiece Review |
The field code is chosen by the largest outline: 300, 500, 800, 1200 or 1600. Part height and position are reviewed against the 600×500×300 mm electric stage travel. |
Field follows the outline, not the artwork. |
|
Spot and Process Match |
Spot size and working distance are read from the field table: 61 μm at 800, 89.6 μm at 1200 and 111 μm at 1500. Fine characters favour small fields and large-area fill favours large fields. |
Spot grows with field size, and so does the minimum character. |
|
Source and Tier Matching |
The source family and power tier follow material and target process, and the 220 V single-phase supply and chiller are checked. |
Single-phase 220 V; the site circuit follows the machine rating. |
|
Sample Test and Validation |
A sample runs on the real part and records spot, line width, contrast, depth or kerf, plus consistency at the four corners and the centre, together with cycle time. |
Full-size parts are required for large fields. |
|
Quotation and Specification Confirmation |
The quotation lists the confirmed field code, source family, power tier, field lens working distance, loading method and automation options. |
Quotation matches the sample record. |
|
Delivery, Installation and Training |
The machine ships in sections, is levelled on site, and BOX calibration and focal-length calibration are completed with operator and process training. |
Large fields need on-site re-calibration |
Quality Assurance
Quality inspection centres on the CO2 optical train, extraction and edge quality: before shipment the scanner coating, field-lens match, full-field focus consistency and extraction airflow are verified; before production a full board confirms relief depth, kerf width and edge burning; the machine leaves the line after optics assembly, field calibration and final function checks.
Factory Strength and Supply
Supply is arranged for advertising-board, textile, leather and veneer volumes: the machine ships in sections and on-site installation covers extraction ducting and full-field calibration; configuration, branding and packaging are reviewed through OEM/ODM discussion, with MOQ and lead time after production-planning review.
FAQ
Q: How is the field code chosen?
A:By the largest outline: use 500 if the part fits, move to 800 otherwise, and 1200 or 1600 beyond that; the minimum character is checked at the same time since a larger field means a larger spot.
Q: How is focus held on curved surfaces?
A: 3D dynamic focusing rewrites the focal plane in real time with Z-axis compensation; steps beyond scanner travel are handled with a sectioned plan.
Q:What site conditions does it need?
A: Three-phase 380 V supply, gantry footprint and floor loading, and extraction ducting; exact figures are issued with the confirmed model during the site survey.
Q: Do you support OEM/ODM?
A: Yes. OEM and ODM discussion is open for branding, station configuration, housing, packaging and documentation; the exact customization limit is confirmed with engineering before production.
Q: Which source serves the 500 W tier?
A:The 500 W tier uses the Coherent Diamond J-6, rated ≥500 W with 650 W typical; the 300 and 400 W tiers are served by the J-5, the 200 W tier by the J-3, the 150 W tier by the J-2 and the 100 W tier by the Cx-10.
Q: How are fumes handled on a large-format CO2 system?
A: Fume extraction is included with airflow set by material and process; leather and rubber work adds activated-carbon filtration, and ducting is planned together with the site survey..
Hot Tags: ht-lf-co2-106 large-format 3d dynamic-focus co2 laser engraver, China ht-lf-co2-106 large-format 3d dynamic-focus co2 laser engraver manufacturers, suppliers, factory, 5w UV Laser Marking Machine, Aluminum Body Handheld Laser Marking Machine, CO2 Flying Laser Marking Machine, Fully Close Fiber Laser Marking Machine, Jewellery Hallmarking Machine, Portable Co2 Galvo Laser Marking Machine
Technical Specifications
|
Parameter |
Specification |
|
Product model |
HT-LF-CO2-106 |
|
Laser wavelength |
10.6 μm far infrared |
|
Power tiers |
100 / 150 / 200 / 300 / 400 / 500 W |
|
Laser source model |
Coherent Diamond sealed RF CO₂: Cx-10 (100 W tier) / J-2 (150 W tier) / J-3 (200 W tier) / J-5 (300 and 400 W tiers) / J-6 (500 W tier) |
|
Rated output power |
≥120 W (Cx-10) / ≥180 W (J-2) / ≥250 W (J-3) / ≥450 W (J-5) / ≥500 W (J-6, 650 W typical) |
|
Power adjustment range |
15–180 W (J-2) / 10–250 W (J-3) / 45–450 W (J-5) / 50–500 W (J-6) |
|
Power stability |
±6% (J series, ±2% with CL option) / ±2% (Cx-10) |
|
Beam quality M² |
< 1.2 |
|
Beam diameter / waist |
1.8 ± 0.2 mm (Cx-10); 7.0 or 8.5 mm (J series at 1/e²) |
|
Beam divergence |
≤ 8.0 mrad full angle (Cx-10) / ≤ 2.0–2.4 mrad (J series) |
|
Modulation frequency and duty cycle |
0–100 kHz, 2–100% DC (Cx-10); single-shot to 200 kHz with duty ≤70% (J-2) / ≤60% (J-3) / ≤40% (J-5) / ≤65% (J-6) |
|
RF excitation pulse width |
2–1000 μs (J series) |
|
Pulse fall time |
≤ 60 μs (Cx-10, J-2, J-3) / ≤ 40 μs (J-5) / ≤ 50 μs (J-6) |
|
Source supply |
48 VDC; 38 A (Cx-10) / ≤60 A continuous (J-2) / ≤90 A (J-3) / ≤190 A (J-5, J-6) |
|
Source heat load |
≤ 1.7 kW (Cx-10) / ≤ 2.5 kW (J-2) / ≤ 4.5 kW (J-3) / ≤ 9 kW (J-5, J-6) |
|
Cooling |
Water cooling; coolant flow ≥5.7 L/min (Cx-10, J-2, J-3) and ≥9.5 L/min (J-5, J-6), setpoint 21–25 °C; fume extraction included |
|
Source dimensions and weight |
563×132×106 mm, 14.5 kg (Cx-10); 830.5×198.1×227.6 mm, 35 kg (J-2); 1064.1×198.1×227.6 mm, 45 kg (J-3); 1225×198.1×227.6 mm, 58 kg (J-5, J-6) |
|
Power supply |
Three-phase AC 380 V / 50 Hz; total power ≤ 8 kW (100–200 W tiers) / ≤ 12 kW (300–500 W tiers) |
|
Working field |
300×300 – 1600×1600 mm with real-time Z-axis compensation for curved surfaces and height steps |
|
3D galvo scanner |
SINO-GALVO large-aperture 3D dynamic-focus scanner with wavelength-specific coating |
|
Field lens |
Wavelength-specific dynamic field lens; lenses of other wavelengths are not interchangeable |
|
Machine structure |
Gantry worktable; optional servo travel axis and large-field vision positioning |
|
Marking speed |
≤ 6000 mm/s |
|
Positioning speed |
≤ 12000 mm/s |
|
Positioning accuracy |
± 0.05 mm over the full field |
|
Repeatability |
± 0.03 mm |
|
Standard station |
Single gantry station with manual loading |
|
Optional configuration |
Rotary dual station, servo travel axis, large-field vision, line integration, fume extraction |
|
Operating environment |
10–40 °C, humidity 20–80% non-condensing |


