< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=959283713349925&ev=PageView&noscript=1" />
enLanguage
HT-NU355-02~30MF UV Nanosecond Laser Marker For Non-Metal Production Marking

HT-NU355-02~30MF UV Nanosecond Laser Marker For Non-Metal Production Marking

The HT-NU355-02~30MF from HTLASER is a small-format galvo marker built for non-metal precision marking in batch production. Its 355 nm UV nanosecond source is offered in six confirmed tiers — 2, 5, 10, 15, 20 and 30 W — selected by part precision, graphics and throughput. The confirmed minimum character reaches 0.08 mm. Cooling is air at lower power and water from 15 W up. A German Scanlab galvo with UV nanosecond-specific coating keeps the optical train matched to the source; lenses stay within this wavelength. The -2D field covers 70×70–150×150 mm for flat parts, and the -3D field reaches 70×70–300×300 mm for large irregular housings and curved parts. Standard station is single, with rotary dual station, vision positioning and line integration optional. HTLASER recommends a sample test on the real workpiece before volume commitment.
Send Inquiry

Shenzhen Chinasky Laser Technology Co., Ltd. is one of the most professional manufacturers and suppliers of ht-nu355-02~30mf uv nanosecond laser marker for non-metal production marking in China. Please rest assured to buy high quality ht-nu355-02~30mf uv nanosecond laser marker for non-metal production marking with 2 years warranty from our factory. We also accept customized orders.

 

HT-NU355-02~30MF UV Nanosecond Laser Marker for Non-Metal Production Marking

Core Benefits

product-3072-768

Reliable Non-Metal Precision Marking

 

The 355 nm UV source marks plastics, PCB/FPC, electronic components and ordinary ceramics with controlled edge quality, supporting legible QR codes, characters and housing labels in batch production. Consistent mark quality across batches reduces rework and simplifies supplier standardization.

Planar Batch and Irregular-Housing Coverage

 

The -2D field serves high-volume flat parts, while the -3D dynamic-focus field handles large irregular plastic housings and curved geometry. Buyers keep both planar and formed parts on the same platform rather than splitting them across machines.

product-3072-768     
product-565-303

Six Power Tiers for Targeted Cost Selection

 

The 2–30 W tier range lets buyers match source capacity to part precision and cycle needs instead of over-specifying power. Lower tiers suit fine marking, higher tiers support deeper etching and light cutting. This targeted selection helps distributors offer a cost-efficient machine for each batch application.

Wavelength-Matched Optical Train

 

The Scanlab galvo carries a UV nanosecond-specific coating and the field lens belongs to the same wavelength set. The optics are specified as a matched system, helping keep spot quality stable and giving buyers clear replacement-lens and consumable rules.

product-1055-422

 

product solution

the HTLASER HT-NU355-02~30MF is selected around the real workpiece: material, geometry, graphics, target result and throughput are confirmed before source and field are matched; station and automation options are configured according to the part flow.

 
 

 

Six 355 nm UV nanosecond tiers (2–30 W) matched to precision and throughput.

 
 

 

≥0.08 mm confirmed character for codes, characters and labels on non-metal parts.

 
 

 

2D planar and 3D dynamic-focus fields for flat parts and irregular housings.

 
 

 

Scanlab galvo with UV-specific coating; wavelength-matched lens set.

 
 

 

FORMULA 355 source datasheet: 10–300 kHz repetition, M²<1.2, TTL/PWM control.

 
 

 

Rotary dual station, vision positioning and line integration as options.

 
 

 

Sample-validated process record before final specification and factory quotation.

Applications
 
01/

Consumer-Electronics Plastic and Component Marking

  Housings, brackets and small plastic parts require legible labels and traceability marks in high volume. The UV source keeps edge quality controlled, and the tier is selected by part size and graphics density.

02/

PCB and FPC Coding

  PCB and FPC parts need precise codes and component IDs without surrounding damage. The UV process supports these non-metal boards; large or irregular boards can use the 3D field.

03/

Automotive Electronics and Packaging Labels

  Automotive-electronic parts and packaging labels combine traceability requirements with batch throughput. Field and station are matched to part flow, with optional vision alignment for repeated positioning.

04/

Ordinary Ceramics and General Non-Metal Engraving

  Ordinary ceramic parts and general non-metal components use UV precision engraving where surface condition matters. Sample records can support the buyer's internal quality review before procurement approval.

 

 

Product Comparison

 

Factor HTLASER Alternative Benefit
Source selection Source matched to workpiece material and geometry Generic source label without material review RFQ built on confirmed inputs; lower source-mismatch risk
2D / 3D coverage 2D planar and 3D dynamic-focus options in one series Planar-only or a separate specialized 3D machine Focus matched to geometry instead of over-specifying or outsourcing
Optical matching Scanlab galvo with wavelength-specific coating; lenses kept within source Loose optics with cross-wavelength lens reuse More consistent spot quality and clearer consumable rules
Station flexibility Single station; rotary dual station, vision and line integration optional Fixed manual station with limited upgrade path Machine scales with volume and connects to buyer fixturing
Sample validation Sample test on the real workpiece before volume commitment No sample validation before bulk order Process result and record basis for internal approval
OEM/ODM Branding, configuration and packaging discussion open; scope confirmed with engineering Standard machine only, no customization Brand owners and distributors align machine with own market and packaging

 

Ordering Process

Step Description Note
Requirement Intake Buyer provides material, size, geometry, graphics, contrast or depth and throughput; these inputs define the source and field setup. Incomplete intake causes source and field errors.
Source and Configuration Recommendation HTLASER maps material to a source, selects the field range, and confirms station and options by batch size and flow. The recommendation becomes the configuration baseline for datasheet and quotation.
Sample Test and Validation A sample is marked on the actual workpiece to check contrast, edge quality, focus behavior and cycle; measured tolerance and cycle are published only after this test. Sample result reduces purchase risk and provides an engineering approval basis.
Quotation and Specification Confirmation After validation, the quotation lists confirmed model, source, field, station options, packaging, MOQ and lead time; remaining To Be Verified items are listed separately. No unverified figure is converted into a confirmed specification in this step.
Production and Quality Inspection The confirmed configuration enters production, with inspection covering optics setup, station assembly and function checks; items follow the confirmed QC procedure. Inspection records support project acceptance and buyer quality review.
Delivery, Documentation and After-Sales The machine ships with agreed packaging and the available document set; after-sales contact, spare-parts scope and service terms are confirmed before delivery. Document set and service scope should match what procurement expects at acceptance.

 

Quality Assurance

  The HTLASER quality section is built around reducing the buyer's procurement risk rather than generic quality claims. Before production, configuration is tied to a validated sample; the sample record documents contrast, edge quality and cycle behavior for that part. In production, the machine follows inspection covering optics and galvo assembly, station setup, electrical and function checks, and final inspection. CE, ISO certificates or RoHS declarations are listed only when a scanned certificate is held; otherwise documents are stated as available on request. Buyers can request a sample test report; final compliance and measured accuracy follow factory records and the test report.

 

 

Factory Strength and Supply

  HTLASER presents supply capability around what matters to project buyers: factory-direct HT-MF supply, configurable source and station options, and engineering communication before production locks the specification. For distributors and OEM buyers, the same selection logic behind a single sample also supports repeat bulk supply; configuration, branding and packaging are reviewed through OEM/ODM discussion. Sample machines can be discussed before volume commitment; MOQ and lead time are stated against the confirmed configuration after production planning review. Factory area, headcount and annual capacity are not confirmed and are not stated; export-ready packaging and a defined document set support procurement review and logistics.

 

FAQ

Q: What is this machine?

A: The HT-MF platform UV nanosecond model using a 355 nm source; 2D for planar parts, 3D dynamic focus for curved or height-varying parts.

Q: Which applications is it suitable for?

A: Typical applications: K-gold deep engraving; Glass micro-hole arrays; Ceramic micro-structures; Non-carbonizing FPC ultra-thin film cutting. The suitable source and field depend on material and geometry; the sample test confirms suitability.

Q: What technical specifications are available?

A: Confirmed information includes source and tiers, field ranges, Scanlab galvo coating and confirmed station options. Accuracy, cycle, dimensions, weight, power supply and environmental range are To Be Verified and confirmed from test reports or engineering documents.

Q: Do you support OEM/ODM?

A: Yes. OEM and ODM discussion is open for branding, station configuration, housing, packaging and documentation; the exact customization limit is confirmed with engineering before production.

Q: Can I request samples?

A: Sample intake on the real workpiece is supported for process validation before volume commitment; the record documents contrast, edge quality, focus and observed cycle. Sample fee, deductible terms and sample MOQ are stated by sales in the quotation.

Q: How do I choose the right model and field?

A: Send material, dimensions, geometry, graphics and target result. HTLASER maps material to the source family, chooses 2D for planar parts and 3D dynamic focus for curves and height differences; vision, rotary station and line integration are added only when the part flow requires them.

 

 

 

 

 

Hot Tags: ht-nu355-02~30mf uv nanosecond laser marker for non-metal production marking, China ht-nu355-02~30mf uv nanosecond laser marker for non-metal production marking manufacturers, suppliers, factory, 100w Safety Enclosed Fiber Laser Marking Machine, 50w Fiber Laser Marking Machine, 60w Fully Enclosed Fiber Laser Marker, Aluminum Body Handheld Laser Marking Machine, laser marking machine, Online Flying Laser Marking Machine

Parameter

Specification

Product model

HT-NU355-02~30MF

Laser wavelength

355 nm UV

Laser source

UV nanosecond, FORMULA 355 series

Power tiers

2 / 5 / 10 / 15 / 20 / 30 W

Repetition rate

10–300 kHz

Beam quality

M² < 1.2

M² < 1.2

Pulse width

15–20 ns

Beam roundness

> 90%

Minimum character

≥ 0.08 mm

2D working field

70×70–150×150 mm

3D working field

70×70–300×300 mm

Galvo scanner

German Scanlab galvo, UV-specific coating

Marking speed

≤ 7000 mm/s

Repeatability

± 0.01 mm

Cooling

Air cooling at low power; water cooling from 15 W

Control interface

TTL / PWM, RS232

Power supply

Single-phase AC 220 V / 50 Hz; total power ≤ 800 W

Operating environment

5–40 °C, humidity 20–80% non-condensing

Optional configuration

Rotary dual station, vision positioning, line integration