< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=959283713349925&ev=PageView&noscript=1" />
enLanguage
RF CO2 Laser Marker For Non-Metal Marking, Engraving And Film Half-Cut
RF CO2 Laser Marker For Non-Metal Marking, Engraving And Film Half-Cut

RF CO2 Laser Marker For Non-Metal Marking, Engraving And Film Half-Cut

The HT-CO2-106-XXMF from HTLASER is a small-format galvo marker organized around non-metal materials. Its RF CO2 source operates at 10.6 μm far infrared and is offered in six tiers — 30, 40, 55, 60, 80 and 100 W — with Coherent Diamond sources: C-30 for 30 W, C-55 for 40 and 55 W, and Cx-10 for 60 to 100 W. Cooling follows the source: air for 30–55 W, liquid for 60–100 W. A German Scanlab galvo with CO2-specific coating keeps the optical train matched to the source; lenses stay within this wavelength. The -2D field covers 70×70–150×150 mm for flat parts, and the -3D field reaches 70×70–300×300 mm for curved or large non-metal pieces. The machine marks and shallow-engraves non-metal parts and performs film half-cut; it is not configured to process metal. HTLASER recommends a sample test on the real workpiece before volume commitment.
Send Inquiry

Shenzhen Chinasky Laser Technology Co., Ltd. is one of the most professional manufacturers and suppliers of RF CO2 Laser Marker For Non-Metal Marking, Engraving And Film Half-Cut in China. Please rest assured to buy high quality RF CO2 Laser Marker For Non-Metal Marking, Engraving And Film Half-Cut with 2 years warranty from our factory. We also accept customized orders.

 

HT-CO2-106-XXMF RF CO2 Laser Marker for Non-Metal Marking, Engraving and Film Half-Cut

Core Benefits

product-500-500

Non-Metal Process Coverage in One Platform

 

The 10.6 μm CO2 source targets acrylic, wood, leather, paper, rubber and similar non-metal materials for marking, shallow engraving and film half-cut. Buyers keep these related crafts and packaging operations on one machine family, simplifying operator training, spare-parts rules and repeat-order standardization.

Six Power Tiers for Marking and Shallow Cutting

 

The 30–100 W tier range matches source capacity to job type: 30–55 W suit marking and shallow engraving, while 60–100 W support shallow cutting and half-cut. Targeted tier selection avoids over-specifying power for light marking jobs or under-sizing for thicker non-metal stock.

product-500-500     
product-691-394

Planar and Curved Non-Metal Coverage

 

The -2D field serves flat signs, labels and craft pieces, while the -3D dynamic-focus field follows curved or large non-metal geometry. Buyers do not need a separate specialized machine for formed acrylic, leather or wide board work.

Wavelength-Matched Optical Train

 

The Scanlab galvo carries a CO2-specific coating and the field lens belongs to the same wavelength set. The optics are specified as a matched system, helping keep spot quality consistent and giving buyers clear replacement-lens and consumable rules.

product-1920-1152

 

product solution

The machine is specified for non-metal parts: material category, whether the graphics are marking or shallow engraving, part size and batch cycle are confirmed first, then the RF CO2 optics are matched across the 30–100 W tiers; this machine is not for metal processing.

 
 

 

Coherent Diamond CO2 source matched to the tier: C-30 at 30 W, C-55 at 40 and 55 W, Cx-10 at 60–100 W

 
 

 

10.6 μm far-infrared output with M²<1.2 and a 1.8 mm beam for a tight spot after the field lens.

 
 

 

Power stability ±5% on C-30 and C-55, ±2% on Cx-10, keeping engraving depth repeatable across a batch.

 
 

 

Air-cooled head on the 30–55 W tiers; liquid cooling only where the Cx-10 platform needs it.

 
 

 

Non-metal marking, shallow engraving and film half-cut; metal processing stays outside the scope.

 
 

 

2D 70×70–150×150 mm and 3D 70×70–300×300 mm fields on a CO2-coated Scanlab galvo.

 

 

 

applications

 

Acrylic Signs and Advertising Boards

Acrylic signs and advertising small boards rely on clean engraved or marked characters and graphics. The CO2 source targets transparent and colored acrylic, with field size chosen by board dimension and 3D focus used on formed pieces.

Wood Crafts and Paper Labels

Wood crafts and paper labels need controlled engraving and legible marks without burning beyond the target area. The tier is selected by material density and whether the job is surface marking or shallow engraving.

Leather Carving and Cutting

Leather parts require surface carving and shallow pattern cutting where edge condition matters. The 3D field supports curved leather geometry; cut depth and edge quality are documented on the sample record.

Rubber Products and General Non-Metal Parts

Rubber components and general non-metal parts use CO2 marking where surface condition and legibility matter. The machine is not configured for metal; suitability for each material is confirmed by sample test.

 

 

Product Comparison

 

Factor HTLASER Alternative Benefit
Source selection Source matched to workpiece material and geometry Generic source label without material review RFQ built on confirmed inputs; lower source-mismatch risk
2D / 3D coverage 2D planar and 3D dynamic-focus options in one series Planar-only or a separate specialized 3D machine Focus matched to geometry instead of over-specifying or outsourcing
Optical matching Scanlab galvo with wavelength-specific coating; lenses kept within source Loose optics with cross-wavelength lens reuse More consistent spot quality and clearer consumable rules
Station flexibility Single station; rotary dual station, vision and line integration optional Fixed manual station with limited upgrade path Machine scales with volume and connects to buyer fixturing
Sample validation Sample test on the real workpiece before volume commitment No sample validation before bulk order Process result and record basis for internal approval
OEM/ODM Branding, configuration and packaging discussion open; scope confirmed with engineering Standard machine only, no customization Brand owners and distributors align machine with own market and packaging

 

Ordering Process

Step Description Note
Requirement Intake Buyer provides material, size, geometry, graphics, contrast or depth and throughput; these inputs define the source and field setup. Incomplete intake causes source and field errors.
Source and Configuration Recommendation HTLASER maps material to a source, selects the field range, and confirms station and options by batch size and flow. The recommendation becomes the configuration baseline for datasheet and quotation.
Sample Test and Validation A sample is marked on the actual workpiece to check contrast, edge quality, focus behavior and cycle; measured tolerance and cycle are published only after this test. Sample result reduces purchase risk and provides an engineering approval basis.
Quotation and Specification Confirmation After validation, the quotation lists confirmed model, source, field, station options, packaging, MOQ and lead time; remaining To Be Verified items are listed separately. No unverified figure is converted into a confirmed specification in this step.
Production and Quality Inspection The confirmed configuration enters production, with inspection covering optics setup, station assembly and function checks; items follow the confirmed QC procedure. Inspection records support project acceptance and buyer quality review.
Delivery, Documentation and After-Sales The machine ships with agreed packaging and the available document set; after-sales contact, spare-parts scope and service terms are confirmed before delivery. Document set and service scope should match what procurement expects at acceptance.

 

Quality Assurance

  The HTLASER quality section is built around reducing the buyer's procurement risk rather than generic quality claims. Before production, configuration is tied to a validated sample; the sample record documents contrast, edge quality and cycle behavior for that part. In production, the machine follows inspection covering optics and galvo assembly, station setup, electrical and function checks, and final inspection. CE, ISO certificates or RoHS declarations are listed only when a scanned certificate is held; otherwise documents are stated as available on request. Buyers can request a sample test report; final compliance and measured accuracy follow factory records and the test report.

 

 

Factory Strength and Supply

  HTLASER presents supply capability around what matters to project buyers: factory-direct HT-MF supply, configurable source and station options, and engineering communication before production locks the specification. For distributors and OEM buyers, the same selection logic behind a single sample also supports repeat bulk supply; configuration, branding and packaging are reviewed through OEM/ODM discussion. Sample machines can be discussed before volume commitment; MOQ and lead time are stated against the confirmed configuration after production planning review. Factory area, headcount and annual capacity are not confirmed and are not stated; export-ready packaging and a defined document set support procurement review and logistics.

 

FAQ

Q: What is this machine?

A: The HT-MF platform model using 30–100 W RF CO2 with Coherent Diamond C-30 / C-55 / Cx-10 sources, 10.6 μm far infrared; 2D for planar parts, 3D dynamic focus for curved or height-varying parts..

Q: Which applications is it suitable for?

A: See the four application scenarios below; source and field depend on material and geometry, confirmed by sample test.

Q: What technical specifications are available?

A: Confirmed information includes source and tiers, field ranges, Scanlab galvo coating and confirmed station options. Accuracy, cycle, dimensions, weight, power supply and environmental range are To Be Verified and confirmed from test reports or engineering documents.

Q: Do you support OEM/ODM?

A: Yes. OEM and ODM discussion is open for branding, station configuration, housing, packaging and documentation; the exact customization limit is confirmed with engineering before production.

Q: Can I request samples?

A: Sample intake on the real workpiece is supported for process validation before volume commitment; the record documents contrast, edge quality, focus and observed cycle. Sample fee, deductible terms and sample MOQ are stated by sales in the quotation.

Q: Which source is fitted to each power tier?

A: The 30 W tier uses the Coherent Diamond C-30; the 40 and 55 W tiers use the C-55, with 40 W as a derated setting so the output stays at 10.6 μm; the 60, 80 and 100 W tiers use the Cx-10, rated ≥120 W at 10.6 μm. The C-30 and C-55 come in air or liquid housings, while the Cx-10 is liquid cooled.

Q:Can the CO2 model process metal?

A: No. 10.6 μm infrared is largely reflected by metal surfaces and absorbs poorly, so this machine's source and field lens are configured for non-metal materials; metal parts should use a fiber or UV model instead.

Q: How is the water cooling matched?

A: The 120 W tier uses a 480 W chiller at 3.5 L/min; 200 W uses 800 W at 6 L/min; 300 W uses 1200 W at 9 L/min, with temperature stability of ±0.5–1.0 °C.

 

 

 

 

 

 

 

 

 

 

 

 

Hot Tags: RF CO2 Laser Marker For Non-Metal Marking, Engraving And Film Half-Cut, China RF CO2 Laser Marker For Non-Metal Marking, Engraving And Film Half-Cut manufacturers, suppliers, factory, 50w Fiber Laser Marking Machine, Desktop Fiber Laser Marking Machine, Fully Close Fiber Laser Marking Machine, Jewellery Hallmarking Machine, Online Flying Laser Marking Machine, Split Fiber Laser Marking Machine